Everybody gets curious about how plumbing systems work, once in a while. Be it a do-it-yourself repair or just general preventative maintenance, we need plumbing advice. This article problem helps with both so that people may be prepared for all kinds of plumbing emergencies.
Noisy pipes is an easy do-it-yourself project. You must anchor all exposed pipes. Get a professional to anchor any hidden pipes if you do not wish to do some work in your floors or walls by yourself.
To avoid frozen pipes in your home, never allow the temperature in your house to drop below freezing and insulate any pipes that are exposed to the elements. Obviously, if it is below freezing outdoors, the pipes will be subjected to the same temperatures. It may take time to thaw so that you can have running water. But, more importantly, the pipes can burst, which will cause a huge mess and big repair bill.
If a pipe freezes, make sure you turn the closest faucet to allow the thawing water to exit. This gives the pressure somewhere to go, and can keep them from bursting.
Give all drains strainers to gather particulate matter that can clog pipes. The strainer used in the kitchen will need to be cleaned frequently. You should clean out the strainer in your bathtub often.
To keep things flowing smoothly through the drain of your bathtub, each month you should feed it baking soda, one cup’s worth, with a cup of vinegar to chase it. Afterward, place a washcloth or towel over the top of the drain, to keep the chemical reactions contained. After letting it sit for a few moments, clear the pipes out with a gallon of boiling water. Doing this periodically should keep your pipes free of hair and soap scum.
Install water-saving shower heads to reduce your energy costs. Your shower consumes a majority of the hot water usage in your home. By installing shower heads that are energy-efficient, you can save over a hundred bucks or more per every shower head in the home.
Don’t treat your toilet like a garbage can if you want to avoid a lot of potential plumbing problems. A lot of commonly-flushed items such as tissues, cotton balls and swabs, paper towels, diapers, and sanitary napkins can clog up a toilet by failing to dissolve properly. Also, use as little toilet paper as possible to clean yourself properly.
The dryer has a lint trap that must be kept clean. This can save you a lot of trouble, including preventing fires. Be sure you inspect your lint trap for tears or holes that could mean lint is going into your pipes, which can cause clogs and issues.
A sink with poor water pressure can often be corrected by cleaning the built-up sediment out of the aerator. Remove the aerator, and then take it apart so it can be cleaned with a brush that has been dipped in vinegar. Then all you need to do is rinse and reassemble the aerator before putting it back on the faucet. Your water pressure should improve because the obstructing particles or buildup have been removed.
Study plumbing while your system is working perfectly so that you’ll be ready if it develops a problem. Just by doing a bit of routine maintenance, you can stave off future issues. Keep these tips handy so you’ll be prepared for any future plumbing need.